# for vibrate

[osiris010]

can anyone tell me the seem edit that lets me switch between vibrate and loud by holding down the # key?

[poetic_folly]

SEEM 004a_0001/004b_0001
**no bit manipulation here, just change the actual value in the offset**
offset 1ED swap to ring style when press/hold # key (01 soft, 02 vibrate, 03 vibe then ring, 04 silent, 05 vibe&ring)

[LoneStarM3]

SEEM 004a_0001/004b_0001
**no bit manipulation here, just change the actual value in the offset**
offset 1ED swap to ring style when press/hold # key (01 soft, 02 vibrate, 03 vibe then ring, 04 silent, 05 vibe&ring)

can anyone tell me the seem edit that lets me switch between vibrate and loud by holding down the # key?

On a similar question, is it possible to vary the intensity of the vibration, something like increasing volume of ring? The Razr vib is much more gentle than my old Nokia. I often switch to silent(vib) going into places like library, restaruants, etc.
(I doubt it...with the very thin form factor of the Razr a large enough vibrator is probably not possible)

[apristel]

For a normal audio ring there is volume ramp up,its kinda nice. Search the seem map. :)

[Insanedrunk]

SEEM 004a_0001/004b_0001
**no bit manipulation here, just change the actual value in the offset**
offset 1ED swap to ring style when press/hold # key (01 soft, 02 vibrate, 03 vibe then ring, 04 silent, 05 vibe&ring)
Two questions,
1.Do I have to do both or either one?
2.How do you edit 004a_0001/004b_0001? is it the same as 0032?

[Jack]

use p2k man and extract the seem with that number the same way you would extract 0032_0001. same method...different seem #.

[Insanedrunk]

Got it,now how do you edit them with XVI32?

[Jack]

open the downloaded seem and open with xvi32. In the bottom left corner you will see the hex location number. You can use the arrow keys to scroll thru the numbers until you find the one you are looking for. If you have to check / uncheck anything in a specific seem, go to Tools > bit manipulation when you have selected the seem you want. After any change has been made, hit the SET button...and make sure to save before you close it out entirely

[Insanedrunk]

like this? and do i do this to both seems?
http://img100.imageshack.us/img100/2061/clipimage002zv1.jpg (http://imageshack.us)

[Jack]

On those 2 seem edits...you just change the actual value. In your pic it shows 05 which means vibe/ring.... changing that number from 05 to one of the others stated above will select that stated option.

[Insanedrunk]

I did that to both but still no swaping...anything wrong?

[Jack]

Did you edit both 004a_0001 as well as 004b_0001 ? And did you save the changes before closing out XVI32?

[Insanedrunk]

Here i give up.here are the 004a/b.theyre edited correctly but no swaping is visible.
http://rapidshare.com/files/1238018/004ab.rar.html

[sstroud]

i thought this did not work on the v3??