Urgent!!! Help!!!! Krzr K1m Wont Start Up!!

[specialed618]

So I flashed my phone with an alltell monster pack by accident. I'm angry at myself. I find a link on this website to fix it. It says it's for USCC and it works on k1m. I download it and flash it...i power cycle the phone. When it turns on it says VERIZON WIRELESS!! not only that...it stays on that screen and does nothing!!!! i cant even flash it anymore cuz it wont connect. WHAT SHOULD I DO?!?!?!?

[Village Idiot]

Ok....
Slow down there.
You have a VZW K1m....
Flashed with the Alltel monster pack...
Then you re-flashed it with the USCC upgrade flash...
Now when you turn the phone on it still says Verizon Wireless and stops loading...

Is that right?

Do this......

Get the VZW K1m Monster here http://www.badongo.com/file/1912514

Next pull the battery out of the phone.
Insert the battery.
Hold the * and # key while turning it on.
You should get the Boot loader screen.
Then flash with the VZW K1m Monster.

Let me know how it goes.

[specialed618]

omg! thank you so much i was able to load a reflash and get that problem fixed...ur a genius! :bananadance: but now the only problem is that i want the original software and i have US Cellular not Verizon.

[Village Idiot]

Awww man.......

USCC..... There is not a monster pack available for the USCC K1m yet.
I will be back a little later to lend a hand.

[specialed618]

well, I was wondering, if I was to get the exact filesystem of the krazr from another USCC krzr would I be able to fix everything? Like, do everything manually thru p2k commander?

[Village Idiot]

I don't really know.
I would do the Alltel MP again first if you tried that.

[Village Idiot]

Try this......

Reflash with the Alltel MP....Why you ask.... Because USCC and Alltel are similar.

Get the complete File System off of a USCC K1m
Get every 27XX seem from a USCC K1m (basically start at seem 2700 and save all the way up to 2799)
Load all the seems first using the P2k Seem editor
Then copy the the complete file system, DO THE CONTENTS OF ONE FOLDER AT A TIME. This may take a while but it may be worth it.

Start the K1m then do a master clear and a master reset.
It should work then.

[nevarDeath]

we also have a few K1m flash files here:
http://www.modmymoto.com/forums/downloads.php?do=cat&id=101

[specialed618]

Ok, so I will try to get that filesystem. In the mean time, do you know, if my phone is flashed with Alltel, Can I activate it with USCC? I lost all my prl, sid, and all that stuff. So, Can I activate an Alltel phone with USCC?

[Village Idiot]

Was your phone active before you flashed it?

[specialed618]

Yes, but it was deactivated after I flashed it. I am able to activate my phones over the phone so I don't have to worry about them checking it. But since it's loaded with alltel software I don't know if it will be compatible.

[specialed618]

oh yea and i lost my prl,, eri, and everything. Is there a way to change my prl. and how do you change the channel on your phone?

[specialed618]

How Do You Change Your Prl??

[milkbone98]

you are on VZW? i know that *228 will activate it, i believe that it updates the PRL also.

[Village Idiot]

Use BitPim to upload the PRL in the PRL folder

Its the PRL out of the USCC v3m.

[nevarDeath]

where is the PRL folder located?

[specialed618]

yea, where is it? BitPim wouldnt recognize my phone so I used p2k commander but I was unable to find the prl folder.

[Village Idiot]

Start BitPim
Pull Battery from phone and leave it out
In View select file system
Then select Files system

[specialed618]

it gives me an error with that prl it says:

BitPim version: 0.9.10-official
An unexpected exception has occurred.
Please see the help for details on what to do.

Traceback (most recent call last):
File "gui.pyo", line 277, in run
File "gui.pyo", line 154, in __call__
File "gui.pyo", line 2074, in writefile
File "phones\com_brew.pyo", line 566, in writefile
File "phones\com_brew.pyo", line 805, in sendbrewcommand
File "phones\p_brew.pyo", line 162, in readfrombuffer
File "prototypes.pyo", line 236, in readfrombuffer
ValueError: The value read should be a constant of 89, but was 75 instead