PDA

View Full Version : HOW chanGE TO BOOTLOADER

amysandha22
02-17-2007, 10:04 PM
hello everyone,i have v360 and the bootloader is 8.D0 and when i try to install MP on it it shows critical error
R4513_G_08.B7.ABR_PDS016_LP0031_DRM0101_JPJAVA_G_0 8_V360_06_00_40R_SEMRHOLLOWMP10_1FF.shx
wat i have to do i have download a bootloader file 8.A0
(LTE2_V360_BootLoader_8A0_BinFormat) plz tell me how i install this file coz its a bin file.........
kirklestat
02-17-2007, 10:07 PM
if you currently have ABR, you don't need to flash it whole. instead, just flash the CG2 and CG15 with Flash&Backup3.
amysandha22
02-17-2007, 10:10 PM
if you currently have ABR, you don't need to flash it whole. instead, just flash the CG2 and CG15 with Flash&Backup3.

how i install these from files from a MP thx
kirklestat
02-17-2007, 10:22 PM
use Flash&Backup3 and on the write data, select the Monster Pack. then just check CG2 and CG15 and uncheck the rest CGs. then simply click write data.
Bullfrog
02-17-2007, 11:48 PM
Hi!
With your bootloader the mrhollow mp will not work, always will get error. You have to recompile to D0.

Here Diabolic53 adapted to A0/D0/09.02:

Mr HollowMP (http://www.mediafire.com/?30jzmhmzjn2)

Regards!
d3mon
03-04-2007, 12:20 PM
Hi!
With your bootloader the mrhollow mp will not work, always will get error. You have to recompile to D0.

Here Diabolic53 adapted to A0/D0/09.02:

Mr HollowMP (http://www.mediafire.com/?30jzmhmzjn2)

Regards!

Does that flash work with AER?
Bullfrog
03-04-2007, 01:07 PM
Nop. AER only works with AER Firmware.
You can't flash any other cause it's a sticky firmware.
d3mon
03-04-2007, 06:22 PM
Nop. AER only works with AER Firmware.
You can't flash any other cause it's a sticky firmware.

Maybe if I want to get rid of that "sticky" firmware. How to do that?
Can I PDS repair without opening my phone? (not so good on opening stuff)
Bullfrog
03-04-2007, 07:05 PM
Well...maybe there is more than one possibility...

One way is with TestPoint, but you have to open the phone.

Other way is with Got_moto but you have to pay.

Another one, still in investigation (at least for your boot).

In our spanish forum the user Arkangel made a tutorial to unlock/pds repair the phone without TP/got moto. We could unlock some phones with succes, putting the phone in black mode. The method works with L7(R4513)/v360 and with A0/D0 boot, 09.02 still in investigation...

Regards.
d3mon
03-08-2007, 06:26 AM
Ok, can i change boot from 09.02 to A0/D0 ?

d3mon :)