RDS lITE vERSION 2.7:error message

[JLSV]

Hello,
I'm trying to flashing/flexing my V3 with RDS LITE and it gives a error:
Failed flashing process:Phone [0000]:error sending JUMP command device API error:0xE0030006 Address: 0x3FD0010 command:RQVN [0xe1231006].

What should i do ?
What is that mean ?

Help please ! Thanks

[Quackers]

Press *#9999# on your phone and post the details given for flex and S/W
Also please state which file you were trying to flash.

[JLSV]

Software version:
R374_G_0E.42.0AR_B
Flex Version:
GSMU3xxT674ZA0FE-2.0.3.3.2.3.2.4.N.0.0.1.0.0.27.4.G.M.28.M.0
Hardware version:
SJUG0164AA

The file which i'm trying to flash is :
AP_CINGULAR_MODDED_MP_NC.shx by apristel.

[poetic_folly]

Try starting your phone in boot loader mode {hold down * and # while powering on the phone** and then flashing. If Windows finds any new devices, make sure and point it to the correct drivers {available from the downloads section**.

[JLSV]

Hello,
I try the Multiflashflex and gives me a error message to.
What's wrong ?

[poetic_folly]

Did you do as I suggested?

[JLSV]

Yes, and it just turn off.
This is one of the error messages:
20:29:40, October 12, 2006
Line: 139
ERROR: E:\Downloads\R374_G_0E4210R_PDS005_LP0039_DRM0001_ JPJAVA_G_0E_V3_01_10R_GSMV3xxT677GA164_1FF\R374_G_ 0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E_V3_01_ 10R_GSMV3xxT677GA164_1FF.hmg couldn't be found.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio. cpp

20:29:49, October 12, 2006
Line: 139
ERROR: E:\Downloads\R374_G_0E4210R_PDS005_LP0039_DRM0001_ JPJAVA_G_0E_V3_01_10R_GSMV3xxT677GA164_1FF\R374_G_ 0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E_V3_01_ 10R_GSMV3xxT677GA164_1FF.hmg couldn't be foud.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio. cpp

20:31:56, October 12, 2006
Line: 3922
ERROR: Phone[0000]: Error sending RAM download for bootloader. Error 0xE0030008
while sending address 0x3FD0010.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp

20:31:56, October 12, 2006
Line: 3922
ERROR: Phone[0000]: *********Flash FAILED!!!*********
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp

[JLSV]

Yes, but it just turn off.
This another error message:
20:29:40, October 12, 2006
Line: 139
ERROR: E:\Downloads\R374_G_0E4210R_PDS005_LP0039_DRM0001_ JPJAVA_G_0E_V3_01_10R_GSMV3xxT677GA164_1FF\R374_G_ 0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E_V3_01_ 10R_GSMV3xxT677GA164_1FF.hmg couldn't be found.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio. cpp

20:29:49, October 12, 2006
Line: 139
ERROR: E:\Downloads\R374_G_0E4210R_PDS005_LP0039_DRM0001_ JPJAVA_G_0E_V3_01_10R_GSMV3xxT677GA164_1FF\R374_G_ 0E.42.10R_PDS005_LP0039_DRM0001_JPJAVA_G_0E_V3_01_ 10R_GSMV3xxT677GA164_1FF.hmg couldn't be found.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio. cpp

20:31:56, October 12, 2006
Line: 3922
ERROR: Phone[0000]: Error sending RAM download for bootloader. Error 0xE0030008
while sending address 0x3FD0010.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp

20:31:56, October 12, 2006
Line: 3922
ERROR: Phone[0000]: *********Flash FAILED!!!*********
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashTh read.cpp

[poetic_folly]

Hmm. Try flashing with FlashBackup3. Or RSD Lite 3.

[JLSV]

Nothing with Flashbackup3 and i can find any RSD LITE 3 to download

[Karsten Dot DK (MegaJoy)]

Have you downgraded your bootloader??? I think it sounds like it doesn't connect correctly to the "S Flash Neptune Lte" or bootloader!!! Good luck and get back to us with more info so we might be able to help you out more. Happy Modding! ;) :cool: :D :p

[JLSV]

Just tell how do i downgraded my bootloader .

[Quackers]

With this http://www.motox.info/showthread.php?t=18133 but to be honest your problem sounds like a driver issue to me.

[JLSV]

This is what i've got
http://img129.imageshack.us/img129/3708/contpz3.png

[ColsTiger]

I think you've got driver issues as well. Try the getting connected guide on The Moto Guide.

[Quackers]

Looks like you are 3 drivers missing. Try connecting the phone to your flashing program whilst in bootloader mode and when the program asks for drivers direct Windows manually to the folder you installed the P2K.sys file (3 more times)

[Karsten Dot DK (MegaJoy)]

They are all correct, you are missing MANY (or 3) drivers. That shows up on your driver device list (or they actually DONT)!!! The getting connected guide here: http://www.modmymoto.com/guides/getconnected.php, would be a good bet for you!!! ;) :D :p

[JLSV]

I can flex but can´t flash, way ?:(

[mark]

What file are you flashing with it? Are you sure it's not currupt.

[orpheus]

after trying the flash, the phone won't turn on. The keys will illuminate, but the screen won't come on. Reflash?

[poetic_folly]

Hmm. phone could be low on battery. Give it a charge for a few hours and let it do that, then power it up.

[orpheus]

Hmm. phone could be low on battery. Give it a charge for a few hours and let it do that, then power it up.

Tried this. Even let the phone sit overnight charging. Still only has the screen black with the keypad lit up. I even tried taking out the battery and replacing with a friend's battery. Once the battery is in place, the keys automatically light up, no turning on needed. Did I royally screw up this phone? I followed all the instructions on the Moto guide or whatever the site is called that is given a few times in this thread.

[Quackers]

orpheus, what phone do you have and what file have you flashed?

[orpheus]

It is a Razr V3 phone. I flashed the "bl_826-828_to_07d0_for_V3_by_Archy.V2.shx" file. I used the RSD Lite 2.5 version. and then then Motorola Unlocker, which said it was successful, but then the phone won't turn on properly.

[poetic_folly]

Hmm. Try turning the phone on in boot loader mode by holding the * and # key and see if it will start up like that. If it does, then you can flash a monster pack and then you should be ok.

[Quackers]

Orpeus, does the screen come on when you close the flip? Just have a look please. You may have used the original "Archy" downgrader producing the reverse flip syndrome.

[orpheus]

I'll look at the phone in the morning (I keep it in my office). Will post then and let you know if it is "reversed"...

Okay, now I am at work, and have checked the screen and no, it does not appear to be on when closed, but the keys are still on. This is what I don't understand. The keys won't stop illuminating.

[orpheus]

Okay, this is weird. When I took the phone off the charger, and connected it to the computer, I could not get it to turn on. The keys will not light up now. RSD Lite is not recognizing that the phone is turned on. Any suggestions? Is there a way to open the phone up and do something inside the phone instead of trying to mess with the software?

[apristel]

Have you removed the battery and tried waiting a few minutes and put it back in?

[orpheus]

Apristel, yes, I have tried this, but will try again. Another thing I tried was even taking the battery from someone else's razr and testing their battery.

[orpheus]

Have you removed the battery and tried waiting a few minutes and put it back in?

Yes, I just did this again and it still will not turn on.

[apristel]

Sounds like your PDS is corrupt. Have you have any backups?

[orpheus]

No. No backups. There wasn't anything on the phone worth saving...so I thought. Is there a way to just install everything new?

[poetic_folly]

Hmm. might need a Smart Clip on that one. I'd pm hagan and see what he can do for you.

[orpheus]

Will do...by the way, what is a "smart clip"? Thank you so much.

[poetic_folly]

Its a hardware device that can go where some modding programs can't. They run a couple hundred bucks and are normally found in authorized service centers. You can buy em off http://www.smart-clip.com/

[hagan]

Keep in mind that your fone is now in boodloader 7.d0 and you might not see anyhting but software will recognize it.
Make sure you have a full battery ( borrow one if need be)insert battery then press the 3 keys *,# Power and hold down for 5 sec now plug the data cable in software should see it , if it does the flash it withan new MP.
Try that first.
Good Luck

[poetic_folly]

Ah good point hagan. Thanks. :beerchug:

[JLSV]

Hello,
I still trying to flash my V3 and nothing. Now i'm trying to seem editing and there's something i don´t understand. I want to activate the video recording with the seem 0032_0001 offset 60 Bit 6 and SEEM 004a_0001/004b_0001 offset 1D3. Everything OK with the f0032_001 but with 004a_0001 .......
Explain to me the right manipulacion to activate the video recording.
SEEM 004a_0001/004b_0001

**all offsets are HEX**
**no bit manipulation here, just change the actual value in the offset**
offset 1D3 (01 for Multimedia > Video Camera, 00 for no Video Camera) (see also seem 0032, offset 60, bit 6)

[poetic_folly]

You don't have to do any bit manipulation at all there. Hence the **no bit manipulation here, just change the actual value in the offset**. All you do is have to click on the offset and type the new value. :D Then save to phone.

[JLSV]

You don't have to do any bit manipulation at all there. Hence the . All you do is have to click on the offset and type the new value. :D Then save to phone.
That's exacly the point, which value. Give me a example:confused13:

[cash7c3]

find offset 1D3

it will have a value of 00

change that to 01

[JLSV]

find offset 1D3

it will have a value of 00

change that to 01
Thanks, but how with the program xvi32 ?

[cash7c3]

uh

open up your seem, hit ctrl+g, type in 1D3 it takes you to that offset. 00 is highlighted. type in 01

[khadijah]

I want a RSD Lite can you help me:sigh:

[wonderkid]

Search Google or 4shared.Its a warez so we cant give the link here!