K1m Problems

[damionix]

I just got the K1m from Sprint and I noticed a lot of messed up situations like the computer can't detect it, and the music in my transflash can't be read. This is so annoying to me.Please someone help I want the computer to recognize my phone

[haytr]

This was emailed to me from motodev. After you establish a connection with the pc, try bitpim for the mem card.

Firstly, you may need to do a complete re-installation of the drivers to be sure of getting stable operation. To delete the existing driver setup, with the KRZR connected to USB and the phone recognised (I realise this may take a number of attempts), go to Windows Control Panel - System. Select the Hardware tab then choose Device Manager. If the handset is correctly recognised, it should appear as a Motorola USB Modem or similar description. Right-click the entry and choose "Uninstall". Repeat this process for as many USB ports as it has been connected to, as driver installation is on a per-port basis. When complete, disconnect the handset and restart the PC.

When this is done, you need to run the Motorola USB Driver Installer if you have not previously done so. Go to the MOTODEV web site, and at http://developer.motorola.com/docstools/USB_Drivers/ download the Handset USB Driver for Windows. Save the package on your PC, unzip it then run the .msi installation file. After this is complete, you will have a new entry for the Motorola USB Driver Installer in your Start - All Programs menu.

Run the Motorola Driver Installer.exe; after it has done its Clean phase, run a Clean & Re-Install. once this is complete, you should be able to connect the phone with it being reliably recognised. This is all you need to do if you only need to enable serial connection between the phone and your PC.

[damionix]

Thanx Mate it helped me greatly. Is there a way to make it recognize the memory card in the phone? U know like an external Drive? And is there a P2K too, Commander that works well with it?
And where do I please get bitpm?

[haytr]

http://www.bitpim.org/

As far as external device, try bitpim, it will read the card directory and see the contents.

I need to use both programs- p2k commander for transferring ringtones, and bitpim for mp3's and transflash, i havent figured out why yet, I am actually trying to tweak mpt to use it for everything cause I actually like the program. When I do, I will post my results.
Cheers

[damionix]

Thanx mate I will be waiting patiently

[damionix]

Can u please help me and tellme what program I need to use to copy a seem out of a phone. I have so many....they are overwhelming

[haytr]

i use p2kseem4V710, its probably here in the download section, or google it the way I wrote it.

[damionix]

Hey mate the bitpim wont recognize my phone I have been trying for more than an hour now

[haytr]

you are recognized by the pc? you are showing a motorola usb modem in your device manager?

[nevarDeath]

i use p2kseem4V710, its probably here in the download section, or google it the way I wrote it.

it can be downloaded here:
http://www.modmymoto.com/forums/downloads.php?do=file&id=1748

[damionix]

I finally got the bitpim to recognise my phone but it takes forever to copy one song into the phone is there a way I can make it go faster?
Thanx I am sorry for so many questions, this is my first time on the CDMA side

[haytr]

Doubt it, thats why I am trying to get mpt to transfer mp3's to card, it seems much faster.