V3re Phonebook

[minder49]

I am having a devil of a time trying to find someway to edit my phonebook. MPT 4.x and 5 will show the phonebook contents, but not allow me to edit them.

Anyone have a way to make edits?

Thanks!

[Dumba]

Just as a thought, can you edit the entries with the phone itself? Or are you looking for a different form of edit?

[minder49]

Yeah, there is no problem editing on the phone, other than it is slow cumbersome and tiring to edit 3 or more numbers plus email addys and addresses from the keypad. not to mention if I copy any entry from the sim, the phone numbers all appear as OTHER.

[Dumba]

Does it work with p2k tools in AT mode? Switch the program to AT mode with the menu in the top left corner, before connecting the phone. Otherwise the program in AT mode will not see the phone in p2k mode.

[minder49]

It will connect in AT mode, but nothing shows in the phone book area. When I try to refresh the phone book, I get " is not a valid integer value. All of the Add Delete etc button are faded out and unavailable.

Guess my thumbs have a lengthy date with the keypad!

[Bobby Lemain]

i actually think ur the 1st to have posted about this... issue

but ya, one day I wanted to add the area code to ALL my contacts, and i was sitting there literally for an hour because i didnt know any better (this was prior to learning that you could mod your phone)

i wish you luck on your "date"

[dzenifr]

It will connect in AT mode, but nothing shows in the phone book area. When I try to refresh the phone book, I get " is not a valid integer value.

I have this same 'valid integer' problem with P2kTools. Did anyone come up with anything for this, any ideas? If not, has anyone found a program that allows you to upload/dl your phonebook on a V3re?

Thanks!


SW Version: R3442A_G_0E.43.08R
Flex: GSTRAZR06ATT01NA0DE
Flashed with this (http://www.modmymoto.com/forums/downloads.php?do=file&id=7439) as of 10/13/08.

[c45p3r]

have you tried connecting your phone and then switching it over to AT mode..if not try that i was able to go in and change every thing on mine i also have all the updated drivers and the new P2K tools 3... you have to make sure that p2k is reading your phone before you can change it over to AT mode

[jcandre]

I spent some time beating my head off the wall with this one to. After several failed attempts with various P2K apps I decided to give the oficial Motorola Phone Tools a try. Believe it or not it worked.
Synced my contact file from outlook with 0 errors..

Give that a try and see if it solves your problem.

-Joe

[Danation]

Got the same problem... Can't see the contents of my phone book. Anybody found a response?

[reloader]

Just spent 10 mins looking into the "not a valid integer" problem.

In the same folder as the P2KTools3.exe you will see a file called 'config.ini'
Open config.ini and scroll down untill you see;

[AT_Mode]
Port=COM6
TimeOut=30000
BaudRate=115200
;0 - ñòàíäàðòíûé, 1 - ðàñøèðåííûé (ROKR E1), 2 - V3x
PhoneBookType=3

PhoneBookType=3 is the invalid integer. Change PhoneBookType=3 to PhoneBookType=0 and save the change.

P2kTools should now display the V3re phone book. If the refresh doesn't work, click on AT mode again so P2KTools recognizes your phone again.

Tested on Versions 3.0.8.864 and 3.0.9.961

[Danation]

Hey, thanks a ton! That worked perfectly!

[Dumba]

Good stuff. Thanks guys.

[dzenifr]

I'm pretty sure you have no idea how much I love you right now for figuring this out.

Thank you so much.

:thumbsup:

[andykwan]

Some of my phonebook entries have some chinese characters. I tried to used both MPT and P2kTools to edit and backup/restore the phonebook, but all the chinese characters will be changed to a "?". Is there a way to keep the characters not changed?

[nickandcarol3011]

Thanks helped me to :)

[kabflash]

Thanks much reloader

[kokomo]

Just spent 10 mins looking into the "not a valid integer" problem.

In the same folder as the P2KTools3.exe you will see a file called 'config.ini'
Open config.ini and scroll down untill you see;

[AT_Mode]
Port=COM6
TimeOut=30000
BaudRate=115200
;0 - ñòàíäàðòíûé, 1 - ðàñøèðåííûé (ROKR E1), 2 - V3x
PhoneBookType=3

PhoneBookType=3 is the invalid integer. Change PhoneBookType=3 to PhoneBookType=0 and save the change.

P2kTools should now display the V3re phone book. If the refresh doesn't work, click on AT mode again so P2KTools recognizes your phone again.

Tested on Versions 3.0.8.864 and 3.0.9.961

I´ve gotten 3.0.9.961b and I still get the invalid integer error whiel switching

[Danation]

When switching to AT mode you still get that? Even when you do the changes to the config.ini file?

[kokomo]

sir, yes, sir.

This is how my config file looks like

[General]
;0 - P2K, 1 - AT, 2 - Flash (ïîêà ÷òî íå äîñòóïåí), 3 - OBEX
Mode=0
Mode2=1
SwitchModeTimeOut=6000
EnableDebug=1
;ClassicSysMenu: 0 - íîâîå office 2007, 1 - ñòàíäàðòíîå îêíî
ClassicSysMenu=0
ShowWindowContent=0
Skins: Office2007.skn
Skin=Office2007.skn
ThemeAdapt=1
Lang=english.lng
AutoPlatform=1
MinToTray=1
RollUp=1
Multiline=1
LeftPanelButtons=1

[P2K_Mode]
ReadDisks=1
CloseP2K=0
DynamicRefreshFolder=1
;P2KCF: 0 - standart, 1 - P2K05
P2KCF=1
IFNUM=0
P2KTimeOut=10000
AmrByRing=1
WavByRing=1
UseMelodyFromCard=1
OtherFeaturesFile=other_features_it.pof
OtherFeaturesFile2=other_features_en.pof
MMA_ReadJava_A=1
MMA_ReadJava_B=1
;-------------- avalaible modules in P2KMode -----
ShowModule_KJava=0
ShowModule_FlexTools=0

[AT_Mode]
Port=COM6
TimeOut=30000
BaudRate=19200
;0 - ñòàíäàðòíûé, 1 - ðàñøèðåííûé (ROKR E1), 2 - V3x
PhoneBookType=0
;0 - âñå çàïèñè, 1..N - n ïåðâûõ çàïèñåé
UseFirstNRecords=0
READ_PHONEBOOK_BLOCK=30
DeleteBeforeRestore=0

[OBEX_Mode]
OBEXAutoUpdateFileList=0
TimeOut=800
;OBEXType: 0 - old, 1 - L7, L7e
OBEXType=1
ShowProgress=0

[Flash_Mode]
CurrentProfile=
FlashTimeOut=6000
;-------------- avalaible modules in FlashMode -----
ShowModule_Patching=1

[Platforms]
; for ringstyles, sound cfg, obex,
PL01=R372|R37|TRIPLETS|R474|R366|R368|R364|R365|
PL02=R47|R374|R478|R373|R472|R376|R474B|R372B|R373 PA|
PL03=R479|R44419|R47A|R4441D|R4513|R4517|R3517|R35 11|R3443H3|R3443H1|R444LH2|R4515|R3512|
PL04=R452D|R4527|R452B|R452J|
PL05=R252211LD|R252211|R25227LD|R25221LD|R252211LD-ORA|R26111VL|R26117LD|
PL06=R26LD|R26|E1000|

[PlatformsKJava]
; for java
KJ00=R372|R365|R368|R376|R472|R37|R374|R364|R474|R 366|R474B|R372B|
KJ01=R373|R373PA|
KJ02=R4513|R4515|R3511|R479|R47A|R4517|R478|R444LH 2|R44419|R3512|R3517|R3443H3|R4441D|R3443H1|
KJ03=TRIPLETS|R3624|
KJ04=R26LD|R26|E1000|
KJ05=R252211|R252211LD|R25221LD|R252211LD-ORA|R252211LD-AS|R252211-AS|
KJ06=R4527|R452B|R452D|R452J|
KJ07=R25227LD|R26111VL|R26111VL-AS|R26117LD|

This is what I get when switching from AT to p2k.

http://img.photobucket.com/albums/v395/k0k0m0/p2ktools2.jpg

it´s in spanish but says "the parameter is not correct"

[Danation]

Oh, from AT to P2k? Yeah, I get that error all of the time, but it doesn't mean anything, as far as I know. It works properly. As long as both modes actually do their job, the error isn't something to worry about.

If it's giving you grief, try version 3.0.8.864 found HERE. (http://www.modmymoto.com/forums/downloads.php?do=file&id=6647) That's what I use. And it's the right link this time, lol.

[Hittz]

Hey Reloader, Was that version 3.0.9.961 of P2KTools? I also use version 3.0.8.864 and my original config.ini looks like this:

[AT_Mode]
Port=COM6
TimeOut=30000
BaudRate=115200
;0 - ñòàíäàðòíûé, 1 - ðàñøèðåííûé (ROKR E1), 2 - V3x
PhoneBookType=1

I tried your edit (changing PhoneBookType=3 to " "=0) but P2KTools version 3.0.8.864 still didnt read phonebook but when I tried changing the value to PhoneBookType=3 (from PhoneBookType=1)it worked and read my V3re perfectly. Could it be the version difference of P2KTools? (just in case others are experiencing this also)

Also tried your config ini edit on version 3.0.9.961 of P2KTools (latest) and it worked as you said.
Thanks Reloader, your work is much appreciated.