[Guide] Installing SMG files with Flash&Backup3

[Clarkey]

Installing .SMG files with Flash&Backup3
By Clarkey

I’m assuming here that the p2k drivers are already installed if not follow Apristel's guide here. (http://www.modmymoto.com/guides/getconnected.php)

What you’ll need:-
1. Flash&Backup3(Available Here (http://www.modmymoto.com/forums/downloads.php?do=file&id=6464))
2. A compatible .SMG (http://www.modmymoto.com/forums/downloads.php?do=cat&id=5)file such as DRM’s, Fonts Or Firmware

Ok let’s get started

1. Open up Flash&Backup3
2. Change Phone Profile to your model(fig 1)

Fig1
http://img113.imageshack.us/img113/4903/phoneprofileha9fn6.png
3. Click the write data tab
4. Click Add binary Croup Code
5. Locate the .SMG you downloaded earlier(fig2)

Fig2
http://img413.imageshack.us/img413/6920/locatefilegw2.png
6. Here’s the tricky bit where you get the box enter start address enter the details as follows
http://img430.imageshack.us/img430/1431/enteradressnk3.png
Name Start Address Code Group
Firmware 10092000 CG1
Flex 11240000 CG2
Language Pack 110A0000 CG4
DRM Graphics 10E6000 CG15

7. Click Write data then you will get a new window
http://img87.imageshack.us/img87/1352/newwindowto7tl7.png
Now it’s complete, your phone will restart and your new font/DRM or Flex will be installed

[Clarkey]

if possible can someone add this to the guides

[poetic_folly]

I'll get it up there tonight. Send me a PM to remind me!

[Clarkey]

has this guide been added yet

[cash7c3]

no will get to it by the end of the weekend, migrating servers atm so content is not being added until that is complete. pm me and remind me after the migration