i cant flash my maxx!

[pade]

i edited 0032 0001 seem, and then was not functionally center button. then i cant backup the seem, and i want backup flex. then was error, and backup is not made. now mobile is only in bootloader, and when i tur on it, it is in bootloader too. i cant flash it! FB3 cant do it. RSD - cant. PST - cant, radiocomm - cant. what can i do??

[poetic_folly]

Are you getting an error message at all with RSD Lite? Or FB3?

[pade]

no error, it is on 0% all the time...

[poetic_folly]

When you go to flash a file, it does nothing? Does it say sending boot loader? Jump command? What precisely are you seeing as far as messages? Is RSD Lite showing the phone as connected?

[JedixJarf]

try takin the batt out for like 10 minutes then try with rsd lite 3.4
What is your s/w version and what are you trying to flash to it?

[pade]

R26111VL_U_96.66.73BR is my, and i was trying flash my backup, GC1 - i enter good start adress, and it was not working... i now charging battery in V3, and then i try again flash one from pioneer's FW...

[poetic_folly]

Ok. I thought you had said you were using RSD Lite--if you were, you would not be selecting any start address.

[pade]

i was using FB3 - because my backup is in SMG files... i will try RSD with one from pioneers FW...

[poetic_folly]

i was using FB3 - because my backup is in SMG files... i will try RSD with one from pioneers FW...

Ah, from this post:
FB3 cant do it. RSD - cant. PST - cant, radiocomm - cant. what can i do??
I thought you were saying RSD Lite wasn't working.

[pade]

oh, RSD i used with one from my backup, but in it is only GC1 GC2 and GC3 ...

http://ukazto.com/img/untitled-wy81.jpg (http://ukazto.com/?img=untitled-wy81.jpg)

[Maddcow]

You should be ok if you flash a monster pack from Pioneer's website using RSD Lite 3.4 and once your phone is up and running, then flash your own CG's.

[poetic_folly]

Plenty of firmware here (http://www.modmymoto.com/forums/downloads.php?do=cat&id=117) you know as well.

[Maddcow]

Plenty of firmware here (http://www.modmymoto.com/forums/downloads.php?do=cat&id=117) you know as well.Yeah I know, but that particular MP isn't there. I s'pose I should have mentioned that at some point.......

EDIT: Sorry, I was referring to the Aussie MP situation from another thread. My bad

[pade]

it is only on 0% in RSD while it is flashing Code Group 1 :cry:

[Martasek]

it is only on 0% in RSD while it is flashing Code Group 1 :cry:

Nechce se mi to prekladat:vomit1: ,ale kdyz ti ukazuje RSD 0-procent,treba FLASHovani bezi normalne....jen neni indikovanu,dela i to kdyz nahravam nejaky REFLASH.vydrz...treba 20minut.

[pade]

flex tam uz je, teraz davam ostatne... a tito anglicania musia mat radost z nasho jazyka :biggerGrin: :grin: :corkysm21:

[poetic_folly]

Guys... English forum, please post a translation.

[pade]

it is ok. my phone is ok. i must change usb cable, and then it is ok, thank for all help.

[JedixJarf]

You bet ya.

[QiKsLvR]

Thanks to you helpful guys, :clap: I just made my first successful backup of my maxx! :D :thumbsup:

[cash7c3]

good job