Please assist, V3re modding mistake(s).

[Tracne]

Any possibility of posting a full backup?
I nuked my phone on accident by removing a few key files i shouldn't have taken out i guess, was following a guide on how to get 10mb free out of your v3re and this happened. Restarted my phone flashed white and black, just off and on. Decided to flash it, now i've been getting this error that persist no matter what, i failed to make a backup before editing which i understand degrades me to a status of less than a noob, but if someone wold please post a full stock back up of the V3re it would be greatly appreciated, or some solution could be derived.

In advance notice, i've tried every backup thats currently available through google using my bootloader and phone model specifics and the ones hosted on this forum.
Screen currently reads out:

Boot Loader
0C.C1
SW Version:R3442_A_G_0E.43.0AR
PH SIG ERR:35:02

OK to Program
Connect USB
Data Cable

Normally starting the phone it displays the "Hellomoto" logo and then goes black, in order to get to the bootloader info i have to hold down * and #.

Any solution to this problem would be greatly appreciated.
Thank you.

Looking closer at my phone under the battery is a little sticker that has a SW number on it, and a few other things, i don't know if it will help any but they are listed as follows: S/W:0E.43.08R

[Dumba]

There is a stock MP in the download section, look if its locked to the same provider you have or if its unlocked. Also have you tried the "take the battery out for a moment trick" yet?

[Tracne]

There is a stock MP in the download section, look if its locked to the same provider you have or if its unlocked. Also have you tried the "take the battery out for a moment trick" yet?

I've done both, but with no luck.
It's AT&T
I found one, which i think it may work, but my battry is to low to flash it, so i'm going to let it charge then see if this will work. Using Flash&Backup 3.07 and RSD lite v3.8.

[noodny]

i have a full backup of; just made it; i'm sure i will break my pfone several times before i unlock it.

[Tracne]

I apologize for not being on to reply on the status of my situation but my phone is functional for the time being with the stock flash on the site but a lot of the functions of the phone do not work anymore. The phone is also not recognized by Motorola Phone Tools v4 now either, sometimes with P2KCommander it doesn't show up.

[Dumba]

Now, that is something new. Did you try and flash again, just incase some bits and bytes got lost at the first attempt?

[Tracne]

Now, that is something new. Did you try and flash again, just incase some bits and bytes got lost at the first attempt?

I have flashed it multiple times to ensure that the process was done appropriately; with still the same result. Its as if the image loaded on to the phone is unstable. Reason in saying this is because when i use P2K Commander(4.9E) to modify the phone's files and then restart or even if i just use the plain 'restart' command it white screens and i'm forced to re-flash the phone. Just kinda got me scratching my head on this one after many hours of research.