PDA

View Full Version : SHXCoDec

zeus
10-13-2006, 12:07 PM
can i make a full working flash (eg drm flash) using SHXCoDec and not going through RandomSHX?

after i edited the drm's, i clicked on 'Make *.shx' it saved as one but i noticed 'CG15' at the end of the file.

i haven't flashed it yet (nearly bricked my phone earlier). just wondering if it's possible.

thanks in advance.
poetic_folly
10-13-2006, 12:25 PM
Make sure your source .shx and your new .shx are saving into the same directory {folder** and yeah, you should be fine. It may have named it ****cg15.shx, but thats ok.
zeus
10-13-2006, 12:29 PM
thanks a million
art2d2tx
10-13-2006, 12:48 PM
Did it work? I prefer to use RandomSHX to compile a flash file. Just replace the ***2.bin file with your cg15.smg file (rename the second one as the first one) and then compile it using RandomSHX. I have had problems creating .shx files withy SHXCodec (They usually give me an error message, and they don't work) while everything has worked fine when using RandomSHX.
NiNJaHw
10-13-2006, 04:19 PM
I use the method art2d2tx mentioned. There is a guide on motox if you want it...
zeus
10-14-2006, 03:47 AM
yup, *.shx from SHXCoDec failed and didn't work, but it opens perfectly on SHXCoDec. i'll do RandomSHX for compiling flash from now on.
OgreStyle
10-14-2006, 06:18 PM
I had the exact same problem with SHXCodec. The DRM flash that I created would give me a critical error. When flashing in F&B3, it was when it was performing JUMP or something.

Can you give a step-by-step on compiling with RandomSHX? What I tried to do was extract the BIN from the SHX created in SHXCodec and then compile that BIN into the new SHX, using RandomSHX. Do I just rename the *.smg to *.bin and use that to create the SHX using RandomSHX?
art2d2tx
10-14-2006, 06:51 PM
I had the exact same problem with SHXCodec. The DRM flash that I created would give me a critical error. When flashing in F&B3, it was when it was performing JUMP or something.

Can you give a step-by-step on compiling with RandomSHX? What I tried to do was extract the BIN from the SHX created in SHXCodec and then compile that BIN into the new SHX, using RandomSHX. Do I just rename the *.smg to *.bin and use that to create the SHX using RandomSHX?

After you have finished modding the DRM file, do this:

1) Use RandomSHX to decompile a DRM file which is compatible with your phone
2) Copy the name of the ***2.bin
3) Delete the ***2.bin file
4) Copy the CG15.smg file (the one that you saved using SHXCodec) to the decompiled filder
5) Rename it with the ***2.bin file (Must be exactly the same)
6) Recompile the file to .shx using RandomSHX