Locked phone after switching the mma_ucp file

[Bokazoit]

Well I can't get any further than to the welcome screen and then it locks and I can't get into the filesystem with p2kmanager...Have I killed my phone?...what are my options from here? :madcaveman:

I can enter the mode for flashing or whatever it's called by pressing # + * + on

So I suppose I can flash or? if so what tools to use and what flash/flex to use?

[Jack]

go into a/mobile/system and delete the mma ucp file. the mma-dcp will regenerate a new one. then restart

[Strsljen]

If you able to get inside follow Jacknmary suggestion...
If not....start phone in bootloader (by pressing * and # while turning your phone on) and flash it with any of those http://www.modmymoto.com/forums/downloads.php?do=cat&id=49
They are all for V3, chose one that you like ;)
And yes make sure you have V3 and you current s/w starting with R374
What version of bootloader do you have?

[Bokazoit]

Tx very much it worked like a charm and I even got a much better software then initially ^^

But two things...

1. any way that I can get a danish language or just the special characters æ,ø,å ?

2. When the phone ring it doesn't answer when I open the phone as before how to enable that?

:drinkin:


If you able to get inside follow Jacknmary suggestion...
If not....start phone in bootloader (by pressing * and # while turning your phone on) and flash it with any of those http://www.modmymoto.com/forums/downloads.php?do=cat&id=49
They are all for V3, chose one that you like ;)
And yes make sure you have V3 and you current s/w starting with R374
What version of bootloader do you have?

[sebgonz]

Tx very much it worked like a charm and I even got a much better software then initially ^^

But two things...

1. any way that I can get a danish language or just the special characters æ,ø,å ?

2. When the phone ring it doesn't answer when I open the phone as before how to enable that?

:drinkin:

1. Check the downloads section for a Danish LP
2. You need to do a seem edit.

offset 02 - bit 0: Settings > In-Call Setup > Answer Options > Open To answer (1 on, 0 off)

Or from your phone, press Menu> Settings
> In Call Setup > Answer Options > Open To Answer.

[Bokazoit]

Hehe very nice. What program to use to upload dansih language pack?
Ohhh, and after I entered the new monsterpack my danish motorola phone tool doesn't recognize my phone anymore, what can I use instead to add ringtones and more importantly to make p2k work (motorola phonetool should be opened before I could do anything in p2k)

And tx for that very fast help in here ;) :drinkin: :smoker: :afro: :ladysman: :guitarist:

1. Check the downloads section for a Danish LP
2. You need to do a seem edit.

offset 02 - bit 0: Settings > In-Call Setup > Answer Options > Open To answer (1 on, 0 off)

Or from your phone, press Menu> Settings
> In Call Setup > Answer Options > Open To Answer.

[Dumba]

To get connected and which program to use, have a look through here, http://www.modmymoto.com/guides/
Danish should be in the downloadsection, I have a look.
http://www.modmymoto.com/forums/downloads.php?do=file&id=696 ok, that's the one.
Make sure your phone is really a v3. Press *#9999# and see if it says r374, if not come back to us with the new info.

[Strsljen]

Hehe very nice. What program to use to upload dansih language pack?

Flash it with RSD lite

[eltashia]

i just got a v3 from my dad to mess around with an did the same thing

[abdeltaola]

HELP!!! HELP!!!!
Okay, so on my Razr V3, I can't get it into bootloader mode with *#power, but when I put the battery in, the keypad lights up.

When I plug it into RSD Lite (version 2.0.3), I get S Blank Neptune LTE as the name of the device. When I try to flash an old monsterpack, it says "You are flashing a reflash file into a file that appears to be blank. This is only a valid use if trying to recover a Neptune LTE/LTS based phone that has SECURITY ERRORS. Do you want to proceed with flashing? I click yes, then it gets through the loading ram for bootloader phase, but fails with "error erasing subscriber unit."

I tried repairing with Moto Repair Studio, and it gives me
Phone found
Flash mode ok
Send loader failed
Exec loader failed
Erasing phone, please wait...
Erase fail

Then it stops.

On ramldr, I get this: Switching to flash mode
then, when I try and do anything else, it just won't go, like the erase button won't even click. I can't get to the ACK Jump part either. And I don't have back-ups for anything other than my seems anyway.

Also, I tried returning the phone to Cingular (which is what the phone is branded, both on the phone and in packaging) and Tmobile (which is what I was using), but since I got it unlocked off of eBay, I can't return it to either since I'm a) receipt-less and b) the phone has been tampered with by being unlocked.

I think that about covers all of my frustrations and failures. Help me please!!!

HELP HELP HELP HELP

Okay, so on my Razr V3, I can't get it into bootloader mode with *#power, but when I put the battery in, the keypad lights up.

When I plug it into RSD Lite (version 4.1), I get S Blank Neptune LTE as the name of the device. When I try to flash an old monsterpack, it says "You are flashing a reflash file into a file that appears to be blank. This is only a valid use if trying to recover a Neptune LTE/LTS based phone that has SECURITY ERRORS. Do you want to proceed with flashing? I click yes, then it gets through the loading ram for bootloader phase, but fails with "error erasing subscriber unit."

I tried repairing with Moto Repair Studio, and it gives me
Phone found
Flash mode ok
Send loader failed
Exec loader failed
Erasing phone, please wait...
Erase fail

Then it stops.

I think that about covers all of my frustrations and failures. Help me please!!!

someone help me please..

[cRiMiNaL_Genius]

Try "got" as in GSM Online Tool, do a pds repair