Jar Files via Bluetooth

[Hairo]

I wonder if there is a way to transfert a jar file via bluetooth.

I saw the video folder patch and the MV method(no corelets), there's a way to patch the razr to send jar files via bluetooth??

[Danation]

Yep. Look for Soca's post about V3 patches. He posted the patch in that thread

[Hairo]

I think sould be a sticky threat about V3 patches

[Danation]

Well, I guess. But there are only two so far.

[Hairo]

I can't find that threat, so you have the link??

[Danation]

http://www.modmymoto.com/forums/showthread.php?t=428161

[Hairo]

Thanks..
-----------------------------
I've never installed a patch before, any guide??

[Danation]

Back up your phone (only CG1,CG3,CG7,and CG18 are needed, but you can do everything if you want.)

Go to the firmwares tab of Flash and backup. Click "Select File" and find your backup.

As far as I know, there's no RSA for V3, so you don't have to check any of the remove RSA boxes.

Check "Apply Patches" and click "Select patches."

Click "add" and add the patches. Then click ok. Then you can click "Quickflash" to flash it to your phone. Or if you want to save the firmware, click "Save as..." and I recommend saving it as a .sbf or .shx.

If that doesn't work, flash your backup back to the phone and post what happened.

I have never done this on a V3, so do so at your own risk.

[Hairo]

It didn't work and i got the "S blank Neptune LTE" so i flashed it again with my stock MP.

BTW, for what BL are them 07.D0 or 07.E0??

[Danation]

It's firmware related. You have to be on the exact right firmware. Which were they written for?

Bootloader 07.D0 and 07.E0 should both work fine.

[Hairo]

Oh... yeah, i have the 15R and they are writen for 10R :duh:
------------------------------------------------
So sould i get the 10R stock MP and flash it??

[Danation]

Just use the firmware, you don't need the whole MP.

Flash CG1,CG3,CG7,and CG18

[new_guy234]

i tried the jar files over bluetooth patch, but it bricked a v3 i have. the keypad lights up when you press the power button, but no display ever shows on the screen. it also goes out like the backlight is working if the power button isn't pressed. my pc now sees it as an unrecognized usb device, so i'm not sure how i can flash a mp back onto it.

any ideas would be greatly appreciated.

[Hairo]

Pull of the battery and go to bootloader mode by pressing * # when you put the battery in and try to flash it with RSD Lite.
--------------------------------
What is your firmware?? must be 10R anyway you could install this MP (http://www.modmymoto.com/forums/downloads.php?do=file&id=7543) when you fix it, it has the patch installed :)

[new_guy234]

i thought about doing that when it happened, but the display screen would always stay blank, regardless of what i tried. it worked though. pulled the battery, went into bootloader mode, rsd lite read it, flashed it, and i'm back in business. thanks again. now i can put the backup phone back up (lol).

[Hairo]

If your BootLoader is 07.D0 or 07.E0 they will not be shown but the RSD lite can tell you what bootloader is :)