Razr v3re No signal Fix

[Blazeb1989]

ok wat i did was i flashed my phone with this file 1st. http://www.4shared.com/file/26827212/8fdadd85/R3442A_G_0E_42_03R_LP0003-FF_desbloqueado.html?dirPwdVerified=e10830d8

2nd file- and it worked fine but had no signal so then i tried to use this file http://www.4shared.com/file/26826004/c49afafa/R3442A_DRM_original.html?dirPwdVerified=e10830d8

and the phone would just show the boot screen then cut off. So 1ST!!!! what you gone have to do is flash with the 1st file, then 2ND!!!! flash with the second file but when you flash with the second file, only flash the 3rd option(may be second) and it should say flex. once it flash the flex the signal should be recoverd... remeber only flash that part of the flash file. I used Flash&backup 3. Let me know how it work. But If u already have the 1st flash file on your computer you can just skip to step 2

[Dumba]

So you say, flash the locked flash and then the unlocked flash, but only cg2 which is the flex. I believe by now that the Bootloader on the unlocked flash after using smartmoto to unlock it, doesn't read the same anymore, nor does the firmware as such.

[Blazeb1989]

i didnt have to use anythang to unlock my ohone such as a smart clip. I just flashed the 1st file, then had no signal, so i flashed the flex from file 2 and it worked fine... usin fb3.. Please leave feedback. and sticky this if you all find it helpfull

1. Flashed phone with the desbloqueado file.

2. Flashed the phone with the flex (only) from the file supplied by wmwinn (V3re_R3442A_G_0E43.08R.shx).

[hagan]

i didnt have to use anythang to unlock my ohone such as a smart clip. I just flashed the 1st file, then had no signal, so i flashed the flex from file 2 and it worked fine... usin fb3.. Please leave feedback. and sticky this if you all find it helpfull

1. Flashed phone with the desbloqueado file.

2. Flashed the phone with the flex (only) from the file supplied by wmwinn (V3re_R3442A_G_0E43.08R.shx).

So you said that by doing this you can unlock your fone?

[Dumba]

:woot: That is fun, please tell us that it is, what you did.

[Blazeb1989]

no im not sho if it will unlock it
i have not tried to use another sim, but it resotred my signal problem

[peni]

maybe i to much a noob but i tried this with no results.
anyone else with sig probs?

[xxalexisrulesxx]

make sure you have a fully charged battery and that the usb cable is conneceted to the usb ports in the back of the computer

[peni]

I DID IT!!!:thumbsup:
unlocked and debranded razor v3re!
bootloader 0c.c1
s/w r3442a_g_0e.43.08r
MUCH THANKS TO EVERYONE HERE:rockon:

[Digital1980]

I DID IT!!!:thumbsup:
unlocked and debranded razor v3re!
bootloader 0c.c1
s/w r3442a_g_0e.43.08r



Seriously? You just flashed with those two files and they worked the magic just like that?!

Peni, were you able to back your r3442a_0c.c1 up with FB3 prior to doing this? I'm having issues with just that part, seems to be some sort of block on doing it??

[Dumba]

And would anybody who has an unlocked v3re please also upload its backup? That way we all have one more to play and try with. :thumbsup:

[xxalexisrulesxx]

and are you sure that by flashing these files that the phone was unlocked?, sounds to easy

[98xploder]

sounds like a fluke in my opinion

[peni]

it was a fluke but phone is unlocked and it is debanded. i just followed directions, and sorry but i did not back up original.

[Dumba]

Now, if a third v3re owner comes and also says his phone is unlocked after doing this, I start believing its not a fluke. Lets see. Please keep results posted here.

[blacksea]

ok wat i did was i flashed my phone with this file 1st. http://www.4shared.com/file/26827212/8fdadd85/R3442A_G_0E_42_03R_LP0003-FF_desbloqueado.html?dirPwdVerified=e10830d8

2nd file- and it worked fine but had no signal so then i tried to use this file http://www.4shared.com/file/26826004/c49afafa/R3442A_DRM_original.html?dirPwdVerified=e10830d8

and the phone would just show the boot screen then cut off. So 1ST!!!! what you gone have to do is flash with the 1st file, then 2ND!!!! flash with the second file but when you flash with the second file, only flash the 3rd option(may be second) and it should say flex. once it flash the flex the signal should be recoverd... remeber only flash that part of the flash file. I used Flash&backup 3. Let me know how it work. But If u already have the 1st flash file on your computer you can just skip to step 2
Hi, I used your instruction now my phone is not working, it turns on for a second then OFF,

[peni]

well i did it agaian, bricked then fixed ,bricked again and fixed again,
still unlocked razor v3re( yes using these files.).
cant do anything else like add DRMs but it works both on att and tmobile.

[bigginge]

ok wat i did was i flashed my phone with this file 1st. http://www.4shared.com/file/26827212/8fdadd85/R3442A_G_0E_42_03R_LP0003-FF_desbloqueado.html?dirPwdVerified=e10830d8

2nd file- and it worked fine but had no signal so then i tried to use this file http://www.4shared.com/file/26826004/c49afafa/R3442A_DRM_original.html?dirPwdVerified=e10830d8

and the phone would just show the boot screen then cut off. So 1ST!!!! what you gone have to do is flash with the 1st file, then 2ND!!!! flash with the second file but when you flash with the second file, only flash the 3rd option(may be second) and it should say flex. once it flash the flex the signal should be recoverd... remeber only flash that part of the flash file. I used Flash&backup 3. Let me know how it work. But If u already have the 1st flash file on your computer you can just skip to step 2

When I try to download the second file there is only one option, (drm). The flex option isn't there. Anyone know where I can get the file that you used?

[chaoma]

I am new here. The link to the second file seem to have change. I can't find CG2 (flex). I only saw CG15 (DRM Graphic). The file is only 4.5MB. Can someone give me the link to the second file. Thanks.

[shappyking]

of course that could not have worked... tested and FAILED!! It didnt even accept the sim.

[modnmotos]

Here is a stock out of the box backup for v3re:
R3442A_G_0E.43.08R
at&t unlocked
http://rapidshare.com/files/81619983/R3442A_G_0E.43.08R-AT_T_Unlocked.rar.html
You can either flash the whole thing or break it apart using SHXCoDec_266 and just flash the cg2. If you dont have anything on the phone thats important then I would suggest flashing the whole thing.

[jdyates]

i dont understand any of this.... can somebody explain it in noobterms?

[Danation]

Certainly. This is the story of a fluke, basically. They flashed two CG2 (flex) files and somehow unlocked and unbranded their phone, so they say.

But it doesn't work. Either they had a miracle happen or they didn't understand what was going on, in my opinion.