wmwinn
11-17-2007, 10:25 PM
I successfully created a new font for the v3re! :) I stumbled through the instructions found here:
http://www.modmymoto.com/forums/showthread.php?t=51607 (http://www.modmymoto.com/forums/showthread.php?t=51607)
One correction: the guide says Open up MotoLangEditor 2.2, and click File--> Open. Now browse to the extracted bin folder and select the file that ends with "2.bin". <<-- This is your cg4.
For the v3re - you need to select the "5.bin" file for font editing (that's the CG4).
Other than that, it's pretty straight forward. I'm going to try a few more fonts - and maybe write up a procedure for other v3re owners.
What's the preferred method for posting a new font for v3re phones (R3442A)?
Can I upload directly to the downloads section of this site?
http://www.modmymoto.com/forums/showthread.php?t=51607 (http://www.modmymoto.com/forums/showthread.php?t=51607)
One correction: the guide says Open up MotoLangEditor 2.2, and click File--> Open. Now browse to the extracted bin folder and select the file that ends with "2.bin". <<-- This is your cg4.
For the v3re - you need to select the "5.bin" file for font editing (that's the CG4).
Other than that, it's pretty straight forward. I'm going to try a few more fonts - and maybe write up a procedure for other v3re owners.
What's the preferred method for posting a new font for v3re phones (R3442A)?
Can I upload directly to the downloads section of this site?