v190 Inverted screen

[gsmamerica]

Hi I received a v190 with inverted screen, the phone was detected as L2 with R3511_G_0A.53.15R firmware, I flashed the flash of milkbone and after errror in rsd I get bootloader screen (also in inverted screen), plz help :singer:

[milkbone98]

You flashed the V190 BU with PST? Try using FBU or RSD instead.

[gsmamerica]

I have flashed it with rsd

[milkbone98]

It sounds like a bootloader issue, it was the case with V3s with the same screen problem. Try flashing an R3511 L6 FW to it. If that does work, you will need to re-flex it to V190, Use FBU and only flash the flex, CG2.

[milkbone98]

WAIT!!! Just use p2k AE and set the flip option to on, that should do it.

[gsmamerica]

Very bad!!! My phone now stucks on bootloader screen after flash with your flash, do u have another flash? Also I have flashes for ultima box but my ultima box have a error right now

[milkbone98]

http://www.savefile.com/files/205006
Try this one with FBU3 ar RSD.

[gsmamerica]

Ok very thanks I will try....
PD: Very rare that also bootloader screen is in inverted mode...

[milkbone98]

The bl screen is also inverted? That makes me think that the flip available option needs to be checked. Strange...

[gsmamerica]

Men this Is the flash that I used and for that flash my phone is in bootloader. Maybe cuz phone was donwgraded? I received the phone with R3511_G_0A.53.15R L2 flash, with screen inverted.

[milkbone98]

IDK, if its a R3511 there shouldnt have been a problem, try to flash just the flex CG2 with FBU. L2 and V190 are basically the same, when i had a v190 i used L6 things with NP.

[kirklestat]

inverted bootloader screen? that's weird! if all else does not work, try Motorla Software Update. it updates even when on bootloader screen.

[gsmamerica]

Ok I flashed the cg2 of your flash and screen is good, but I cant see some letters. Also bootloader screen is inverted still. Can you give me the flex in hs format?

[milkbone98]

CG2 is the flex, i guess you could try a reflash now, thats CG1. I would also reflash the language pack and DRM, LP = CG4 and DRM is CG15. You should be safe using LPs and DRM from the L6 section here, Ive done it before with a V190.

[gsmamerica]

Yes but I had some problems some times when I put a flexlash in a phone that dont have the same version of flash, for me is best to put the hs in this moment....