K1M verizon need help cant figure out where in pst to download the PRL, ERI, MMS, 1xT

[shaggyballs@comcast.net]

K1M verizon ..cant figure out where in pst to download the PRL, ERI, MMS, 1xTTData, BREW config.... any help

[shaggyballs@comcast.net]

so sorry ....dont need this thread it can be deleted if you want..up to you ...sorry

[nevarDeath]

You got it working? I was going to suggest following these instructions,

1)connect your phone and open the program
2)Go to "File" then "New"
3) Select what you want
4) Up at the top bar, where the buttons are you'll see two new buttons light up. They are phones with blue arrows. Click the "Read from phone" button. I think it's the one on the left.
5)After it's done got to "File" and "Save"!


except when you select new file, click on the version 6.xx tab first, then read from phone. How did you do it?

[shaggyballs@comcast.net]

no !! couldnt get it .... i thought i would be able to get it but "dee-dee-dee" ....as carlos would say .......having trouble locating the version 6.xx tab

[nevarDeath]

Hmm, yeah I just looked around, the only time that comes up is on the RTT browser file...What happens when you try to do the instructions I gave you?

[shaggyballs@comcast.net]

X MMS feature support validation failed
brew file was saved
dont see choice for prl or eri or 1xttdata
lots of other choices there!!!

[nevarDeath]

Yeah I'm not sure what to tell you on this. I'm going to have to go do some research

[shaggyballs@comcast.net]

i noticed mabey some stuff is visable under pkcommander....grasping at straws

[nevarDeath]

The process is here along with the files you need:
http://mark.cdmaforums.com/KRZR-Alltel.htm
:D

[nevarDeath]

Also here's how to back them up. It may just not work with the K1....

Use Motorola PST to backup additional files.... Unplug your phone from the PC, power it off, then back on, and re-connect it to the PC. Start PST Phone Programmer. Use the File pull down, and click on NEW. Select BREW File, and click OK. Use the Phone pull down menu and click on READ. When the PST Phone Programmer Progress window indicates the Read Procedure has completed successfully, (it says "It's now safe to disconnect the phone"), close that progress window. In the PST Phone Programmer window, use the File pull down menu, and click SAVE AS... name the file, and click save...

Repeat the process using PST to backup each of the following... CDMA Enhanced Roaming Indicator (ERI) File, CDMA NAM File, CDMA Preferred Roaming File, Feature File, Mobile IP File (NOTE: you might get an error stating this may or may not be supported, click YES to continue, it will report Partially completed), MMS Data File, RTT Data File and RTT Browser File (NOTE: have Ver 6.x tab selected before you click READ FROM PHONE).

NOTE: You do not need to exit PST, or unplug/poweroff/poweron/replug between READ operations.

When you have finished, in the PST Phone Programmer window, use the PHONE pull down menu, and click RESTART. If RESTART is grayed out. Click File -> New -> Phone Book -> OK. then do Phone -> Restart. When PST's progress box says restart is complete, "It's safe to disconnect the phone" Exit PST.

Source (http://mark.cdmaforums.com/V3C-Process.htm)

[Sinikal]

i encounter and error when i try to save the MMS Data File. i get a "MMS Support Feature Validation Failed"... What do i do???