I successfully created a new font for the v3re!

I stumbled through the instructions found here:
http://www.modmymoto.com/forums/showthread.php?t=51607
One correction: the guide says
Open up MotoLangEditor 2.2, and click File--> Open. Now browse to the extracted bin folder and select the file that ends with "2.bin". <<-- This is your cg4.
For the v3re - you need to select the
"5.bin" file for font editing (that's the CG4).
Other than that, it's pretty straight forward. I'm going to try a few more fonts - and maybe write up a procedure for other v3re owners.
What's the preferred method for posting a new font for v3re phones (R3442A)?
Can I upload directly to the downloads section of this site?