Ok, so here's a patching guide for Flash and Backup 3.0.4.

Ajeya

Note: You need to use a firmware which allready has the RSA protection removed. Here's a guide on removing the RSA protection.

First make sure that your firmware is R3511_G_0A.52.45R_A_ (Most patches uses this firmware, always check the firmware version of the patch).

1. Make a backup of your CG1 (firmware).




2. After making its backup just click firmware tab and click select file (The file which you made a backup of) it should be like this now.




3. Now comes the tricky part. Click from active profile button and then remove RSA Verfication....LTE2 phones. Like this.




4. Now click apply patches and click select patches: Add all the .fpa files (All the patches) and click OK. Like this.





5.Now there are 2 options. Either you save the file by clicking save as button... (You can flash it afterwards. I think it' better. )
Click save as. Give the file a name. File type: SHX (or SMG) and save.
It will be saved as a patched firmware. You can flash it later like any other firmware.




6. Or u can directly flash the patched firmware by clicking quick flash button. You don't need to the above step ( step 5).

Enjoy!

Guide by Ajeya for Modmymoto.com.
Screenshots & edited by SuperJoker.