KRZR K1 Remove RSA Create Firmware

From Guides

by rodrigocastrillon

Steps:

1. Run FlashBackup (FB) select the tab “firmwares”, click “select file” and select your backup/MP;

2. Now check “Remove ‘RSA’ verification (new method for LTE2 phones)”;

3. Choose the SMG format and click “save as”. Choose a folder and save ;

4. Apply the 3 autopatchers onto the CG1. Remember... CG1;

5. Run XVI32 and open CG7. Go to address C82 and overwrite with the following: “4801 4700 46С0 13FE 0015”. Save;

6. Run F&B again. Go to tab “firmwares” click “create new”, uncheck “Remove ‘RSA’ verification (new method for LTE2 phones)”, click Select RAMDLD” and choose the one we've made in step 3 (in the "address" box, just click OK);

7. Now we have to add the other CGs. Click “Add”, an choose CG1. Do it for all other CGs (1,2,3,4,7 AND 15, NOT 18!!!);

8. Now we have to add the "K1 dualboot 3.3.bin". Now you have a complete patched firmware! Choose to save as SHX and click "save as". DONE!!

Files:

K1 Dualboot 3.3

Run Phone Lte2 Autopatcher

Don't Crypto PDS Autopatcher

Sec ver prot reg locked Autopatcher